Innokin Kroma-A Crios 75W TC Starter Kit
The Innokin Kroma-A 75W TC Starter Kit is the updated revision of the Kroma System, streamlining the design of the device with the removal of the recessed 510 section while retaining the versatile per..
- Product Code: M00000319
- Availability: In Stock
The Innokin Kroma-A 75W TC Starter Kit is the updated revision of the Kroma System, streamlining the design of the device with the removal of the recessed 510 section while retaining the versatile performance to pair with the new Innokin Krios Sub-Ohm Tank. The Kroma-A Box Mod retains the ergonomic form of the original, presenting soft contour around the chassis while replacing the recessed 510 section with a flat base to accommodate a wider range of atomizers. Operated by an oversized firing mechanism and two button adjustments, an accompanying OLED screen provides a large display matrix for essential information at a quick glance. It is powered by a built-in 2000mAh Li-Po rechargeable battery, offering superior battery life and can be quick-charge up to 2A. Integrated within the device is a powerful Aethon chipset, providing steady power output with a threshold limit of 75W and precision temperature control with native support for Kanthal, Titanium, Ni200 Nickel, and Stainless Steel 316L heating elements. Included with each kit is the introduction of the Crios Sub-Ohm Tank, featuring 4 milliliters of e-juice capacity, twist-off top-fill design, and triple slotted bottom airflow control. The Crios Tank utilizes a new bottom vertical atomizer coil design, deploying a 0.65ohm Crios BVC Clapton Coil rated for 35 to 65W. The entire tank structure is completed with a beautiful ULTEM widebore drip tip for cooling properties as well as aesthetics effect.
Innokin Kroma-A 75W TC Mod Features:
- Integrated Aethon Intelligent Chipset
- 2000mAh Internal Battery
- Wattage Output Range: 6-75W
- Voltage Output Range: 0.8-9V
- Minimum Atomizer Resistance: 0.1ohm
- Temperature Control Range: 200-600F
- Supports Ni200, Titanium, and Stainless Steel 316L Heating Elements
- Precision Temperature Control
- Balanced Coil Heat-Up
- Direct Current - Steady Power Output
- Dry Hit Detection
- Low Standby Power Consumption
- PreBoost Ramp-Up Technology
- Stealthy Design Soft Contour With Grip Control
- Intuitive OLED Display Screen
- Oversized Firing Button
- Two-Button Adjustments
- Over-Discharge Protection
- Low Voltage Warning
- Short Circuit Protection
- Atomizer Protection
- Overheat Protection
- MicroUSB Port - 2A Rapid Charging Capability
Innokin Crios Sub-Ohm Tank Features:
- 4mL Juice Capacity
- Superior Stainless Steel Construction
- Pyrex Glass Reinforcement
- Convenient Twist-Off Top-Fill Design
- Triple Slotted Bottom Airflow - Fully Adjustable
- 0.65ohm Crios BVC Clapton Coil - rated for 35-65W
- Sloped ULTEM Widebore Drip Tip
- 510 Drip Tip Adapter
- 510 Connection
- 1 Kroma-A 75W Box Mod
- 1 Crios Sub-Ohm Tank
- 2 0.65ohm Crios BVC Clapton Cois
- 1 510 Drip Tip Adapter
- 1 Replacement Glass Tube
- 1 MicroUSB Cable
- Instructional Manual
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.